|
|
|
 BST Carbon Fiber Wheels for Ducati, Aprilia, BMW, Triumph, KTM, And More ... |
|
 |
| |
Rever Corsa is very proud to offer BST products. BlackStone Tek was born out of the extensive experience of its founders in the motorcycle racing industry, aeronautical engineering, composites knowledge and aerospace fields. BST has more than 12 years of experience on the motorcycle racetracks of the world and in designing custom sport and race bikes. BST has many years of experience in working with carbon fiber and carbon composites in the aeronautical industry. Combining all this knowledge to create the best parts for motorcycles - wheels, tanks, frames, sub-frames, fenders - for road and race environments. Rever Corsa strongly believes in the quality of BST carbon fiber wheels, and they have simply destroyed all the misconceptions of carbon fiber wheels. Not only are BST carbon fiber wheels stronger and lighter than anything else available they also cost about the same as Magnesium (the only comparable material). Rever Corsa sells BST carbon fiber wheels for Aprilia, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph, and Yamaha motorcycles in multiple designs. |
| |
|
| |
|
BST Carbon Fiber Wheels Are The Lightest!
- BST's unique 5- or 7-spoke carbon fiber wheels are made using the latest in composites technology, materials and manufacturing processes. This lightweight and exceedingly strong wheel is suitable for both racing and street use. BST carbon fiber wheels have been tested at Rim Technology, Eurotype Test Centre and German TUV, and passed all the tests for road certification. And most important of all, BST carbon fiber wheels are unique in that they are created as a single unit - we don’t bond pieces together.
- BST carbon fiber wheels are unique – monocoque (single unit) design with 5 or 7 hollow spokes and are suitable for both street and race use.
- BST carbon fiber wheels will save you anything between 40% - 60% in weight, and more importantly, are designed to deliver the lowest Moment of Inertia - the critical factor that affects the performance of the bike.
Click Here to Contact Rever Corsa |
|
| |
|
| |
|
BST Carbon Fiber Wheels Are Extremely Strong!
- Because BST can engineer with carbon fiber and maximize on its properties of high strength and low weight, they have reduced the weight in the spokes and rim without compromising strength. The weight is therefore concentrated in the hub, which means that rotational inertia is reduced, making the bike easier to handle, and allowing you to accelerate quicker and brake later. So not only is the BST carbon fiber wheel lighter, but it is engineered for maximum performance.
- The entire process is managed under ISO9001:2000 standards. BST designs the tooling, molds, wheels, and the hubs and manufacture them onsite. Cutting machines such as those used in the aeronautical industry ensure that the process is guaranteed and repeatable to our high standards. Layup is done in a clean room (dust-free).
- The BST carbon fiber wheels are cured in an Autoclave at 125 degrees C and 6 bar of pressure. This ensures the best compaction and surface finish.
|
|
| |
|
| |
|
BST Carbon Fiber Wheels Are So Beautiful!
- Every step of the process is logged and the entire history of each BST carbon fiber wheel is stored with its unique Serial Number.
- The carbon fiber that BST uses is a combination of woven and unidirectional formats, and is embedded in a resin matrix made from toughened epoxy. Pre-preg is used as the machine application of the specific resin systems ensures the most controlled and even application and therefore the highest quality material for use in all BST products.
- The hub is attached to the BST carbon wheel using a unique fastening system combining high strength aerospace fasteners with mechanical locking mechanisms as well as high strength aerospace adhesive.
|
|
|
|
|